Marking machine

Model no.  MM052

Marking machine is used to engrave serial numbers on hard products or surfaces. The engraving may be in digits, letters or symbols according to used numbering head. Engraving could be applied on any material like glass, Metal, Stones or wood and any like materials.

Marking machine is provided with numbering head which vibrates in high frequency so that the head numbers are engraved on any facing surface without applying any force or impact to the marked product.

Using marking machine; Delicate products could be numbered without damage or broken.

A set of numbering heads could be prepared according to work needs where a head is prepared for serial numbers and other for codes ,  Third for symbols and one for loge and so on .

This way; Any product or inventory could be marked permanently with known marks without damage and it is easy to follow it up.

Technical specifications :

  • Marking machine to work on any material and supplied with numbering head.

  • Machine is prepared with light indicator and on/off switch.

  • Machine is driven through 0.25 hp electric motor 220 v.

  • Numbering head can engrave any number consists of  7 digits .

  • Numbering area is 6.5 cm length by 8 mm height.

  • Engraving of numbers could be applied on any material with 0.5 mm depth.

  • Numbering head vibrates at high frequency in 0.5 mm range.

  • Machine can mark on surfaces at 4 cm depth

  • Machine overall dimensions are 27 cm length by 130cm width by 23 cm height.

  • Machine weight is 6.5 kg.